Protect Your Bike by Packing Properly with the EVOC Bike Bag

Intro – the EVOC Bike Travel Bag Review

In this post I show you how to pack your bag in the EVOC Bike Travel Bag. Although this is specific to this particular bag, the principles can be applied to any bag.

In a previous post I showed how to pack your bike in a Polaris (or Polaris OEM copy) bike pod.

How to Pack your Bike in the EVOC Bike Bag

If you’re not familiar with the EVOC, I highly recommend you check out my EVOC Bike Travel Bag Review, with video and photos.

I’ve created a video showing you how to pack your bike in under 8 minutes, but you’ll probably want to take some time to study the photos too.

The EVOC does a pretty good job of protecting your bike as a result of its design. There isn’t too much more you’ll need to do to make your bike ultra safe, but I’ve included a couple of extra safety tips below.

First up, I remove the bike’s handlebars. You can remove your pedals if you want to lessen the chances of a pedal getting wacked and putting pressure on the cranks, but, depending on your bike size and pedals, you probably will be ok only taking one, or none, off. A pedal wrench isn’t too heavy and can be put in the bag’s tool pocket, so it’s probably better to take both off.

The wheels are removed from the bike.

I also put the supplied fibreglass stringers in their places at the rear of the bag. These help hold the bag in shape when it’s upright and come in handy when you’re putting the bike in.

Stringers

Next, I lay the bag on the ground. It is easier to place the bike and secure it without gravity working against you!

Empty Bag

The bike is simply placed in the bag. Sorry about the sideways photo.

Bike in Bag

I secure the seat post using the straps. Note that for bigger or smaller bikes (mine is a 54), you can move the straps fore and aft as required.

Seatpost secured

The forks sit inside the EVOC Road Bike Adaptor Kit (sold separately – Wiggle, Chain Reaction) and are secured to the frame as well as internally to the bag.

Forks go here

Resting on Block

Before securing your frame with the frame straps, put the Road Bike Adaptor Kit frame protector around the top and down tubes as shown below.

Frame protector

The handlebars can go behind the bike or on top. As I use Yokozuna cables, which are very stiff, the positions I can put the bars in are pretty limited. I put them on the top usually, but here you can see them on the bottom (under the bike). Note that I have not fitted the adaptor kit padding yet (step above).

You can also see the strap that is used to hold the bike down, securing the bike using the top and down tubes.

Behind Bike

Next, we need to secure the chain stays.

The EVOC Bike Travel Bag provides a block that can be moved forward and backward, that the bottom bracket and stays rest on.

The internal block

The straps secure the bike as shown. When I pack my bike for a trip, I always wrap a towel or bubble wrap around the cranks/bottom bracket, the chain stays and the rear D/R. before I strap the bike in, to protect the frame and straps from each other.

Secured on block

The wheels simply slot into the side pockets with skewers off.

Wheel storage

Wheel braces

Make sure you add the plastic piping inside the holders. These pipes help provide protection for the wheels.

Finishing Touches
I always tape my rear D/R back so give it more clearance (see below) then wrap bubble wrap around it.
Better to be safe than sorry.

Rear D/R

I also add some padding on top of the seat, around the headset and stem, and make sure the shifters are protected. If you have Shimano shifters, you’re at less risk here as the the brake levers rotate inward, unlike SRAM.

Add padding to SRAM

So that’s pretty much it. It’s very easy to pack your bike in the EVOC Bike Travel bag, and I find it easier and faster each time. Once again, I highly recommend you check out my EVOC Bike Travel Bag Review, with video and photos.

You can get the EVOC using the below links. Disclosure: these are affiliate links.

• Wiggle + Road bike adaptor kit (if those links don’t work, try this link for the bag and this link for the adaptor)
• Chain Reaction Cycles + road bike adaptor kit (RBAK) – (if those links don’t work, try this link for the bag and this link for the RBAK).
• ProBikeKit + Road bike adaptor kit,(if those links don’t work, try this link for the bag and this link for the adaptor)

Mailing List

If you haven't, please sign up to the VeloNomad mailing list for all the great tips and tricks delivered straight to your inbox (once a week usually).

Did I Answer Your Question? Got a topic suggestion?

Tell me what information you need in the Comments below!